Warning
This program is experimental and its interface is subject to change.

Name

nix build - build a derivation or fetch a store path

Synopsis

nix build [option...] installables...

Examples

Build the default package from the flake in the current directory:
```
# nix build
```

Build and run GNU Hello from the nixpkgs flake:

# nix build nixpkgs#hello
# ./result/bin/hello
Hello, world!

Build GNU Hello and Cowsay, leaving two result symlinks:

# nix build nixpkgs#hello nixpkgs#cowsay
# ls -l result*
lrwxrwxrwx 1 … result -> /nix/store/v5sv61sszx301i0x6xysaqzla09nksnd-hello-2.10
lrwxrwxrwx 1 … result-1 -> /nix/store/rkfrm0z6x6jmi7d3gsmma4j53h15mg33-cowsay-3.03+dfsg2

Build GNU Hello and print the resulting store path.

# nix build nixpkgs#hello --print-out-paths
/nix/store/v5sv61sszx301i0x6xysaqzla09nksnd-hello-2.10

Build a specific output:

# nix build nixpkgs#glibc.dev
# ls -ld ./result-dev
lrwxrwxrwx 1 … ./result-dev -> /nix/store/dkm3gwl0xrx0wrw6zi5x3px3lpgjhlw4-glibc-2.32-dev

Build attribute build.x86_64-linux from (non-flake) Nix expression release.nix:
```
# nix build --file release.nix build.x86_64-linux
```

Build a NixOS system configuration from a flake, and make a profile point to the result:

# nix build --profile /nix/var/nix/profiles/system \
    ~/my-configurations#nixosConfigurations.machine.config.system.build.toplevel

(This is essentially what nixos-rebuild does.)

Build an expression specified on the command line:

# nix build --impure --expr \
    'with import <nixpkgs> {};
     runCommand "foo" {
       buildInputs = [ hello ];
     }
     "hello > $out"'
# cat ./result
Hello, world!

Note that --impure is needed because we're using <nixpkgs>, which relies on the $NIX_PATH environment variable.

Fetch a store path from the configured substituters, if it doesn't already exist:
```
# nix build /nix/store/rkfrm0z6x6jmi7d3gsmma4j53h15mg33-cowsay-3.03+dfsg2
```

Description

nix build builds the specified installables. Installables that resolve to derivations are built (or substituted if possible). Store path installables are substituted.

Unless --no-link is specified, after a successful build, it creates symlinks to the store paths of the installables. These symlinks have the prefix ./result by default; this can be overridden using the --out-link option. Each symlink has a suffix -<N>-<outname>, where N is the index of the installable (with the left-most installable having index 0), and outname is the symbolic derivation output name (e.g. bin, dev or lib). -<N> is omitted if N = 0, and -<outname> is omitted if outname = out (denoting the default output).

Options

--dry-run

Show what this command would do without doing it.
--json

Produce output in JSON format, suitable for consumption by another program.
--no-link

Do not create symlinks to the build results.
--out-link / -o path

Use path as prefix for the symlinks to the build results. It defaults to result.
--print-out-paths

Print the resulting output paths
--profile path

The profile to operate on.
--rebuild

Rebuild an already built package and compare the result to the existing store paths.
--stdin

Read installables from the standard input. No default installable applied.

Common evaluation options

--arg name expr

Pass the value expr as the argument name to Nix functions.
--arg-from-file name path

Pass the contents of file path as the argument name to Nix functions.
--arg-from-stdin name

Pass the contents of stdin as the argument name to Nix functions.
--argstr name string

Pass the string string as the argument name to Nix functions.
--debugger

Start an interactive environment if evaluation fails.
--eval-store store-url

The URL of the Nix store to use for evaluation, i.e. to store derivations (.drv files) and inputs referenced by them.
--impure

Allow access to mutable paths and repositories.
--include / -I path

Add path to the Nix search path. The Nix search path is initialized from the colon-separated NIX_PATH environment variable, and is used to look up the location of Nix expressions using paths enclosed in angle brackets (i.e., <nixpkgs>).

For instance, passing
```
-I /home/eelco/Dev
-I /etc/nixos
```
will cause Nix to look for paths relative to /home/eelco/Dev and /etc/nixos, in that order. This is equivalent to setting the NIX_PATH environment variable to
```
/home/eelco/Dev:/etc/nixos
```
It is also possible to match paths against a prefix. For example, passing
```
-I nixpkgs=/home/eelco/Dev/nixpkgs-branch
-I /etc/nixos
```
will cause Nix to search for <nixpkgs/path> in /home/eelco/Dev/nixpkgs-branch/path and /etc/nixos/nixpkgs/path.

If a path in the Nix search path starts with http:// or https://, it is interpreted as the URL of a tarball that will be downloaded and unpacked to a temporary location. The tarball must consist of a single top-level directory. For example, passing
```
-I nixpkgs=https://github.com/NixOS/nixpkgs/archive/master.tar.gz
```
tells Nix to download and use the current contents of the master branch in the nixpkgs repository.

The URLs of the tarballs from the official nixos.org channels (see the manual page for nix-channel) can be abbreviated as channel:<channel-name>. For instance, the following two flags are equivalent:
```
-I nixpkgs=channel:nixos-21.05
-I nixpkgs=https://nixos.org/channels/nixos-21.05/nixexprs.tar.xz
```
You can also fetch source trees using flake URLs and add them to the search path. For instance,
```
-I nixpkgs=flake:nixpkgs
```
specifies that the prefix nixpkgs shall refer to the source tree downloaded from the nixpkgs entry in the flake registry. Similarly,
```
-I nixpkgs=flake:github:NixOS/nixpkgs/nixos-22.05
```
makes <nixpkgs> refer to a particular branch of the NixOS/nixpkgs repository on GitHub.
--override-flake original-ref resolved-ref

Override the flake registries, redirecting original-ref to resolved-ref.

--commit-lock-file

Commit changes to the flake's lock file.
--inputs-from flake-url

Use the inputs of the specified flake as registry entries.
--no-registries

Don't allow lookups in the flake registries.

DEPRECATED

Use --no-use-registries instead.
--no-update-lock-file

Do not allow any updates to the flake's lock file.
--no-write-lock-file

Do not write the flake's newly generated lock file.
--output-lock-file flake-lock-path

Write the given lock file instead of flake.lock within the top-level flake.
--override-input input-path flake-url

Override a specific flake input (e.g. dwarffs/nixpkgs). This implies --no-write-lock-file.
--recreate-lock-file

Recreate the flake's lock file from scratch.

DEPRECATED

Use nix flake update instead.
--reference-lock-file flake-lock-path

Read the given lock file instead of flake.lock within the top-level flake.
--update-input input-path

Update a specific flake input (ignoring its previous entry in the lock file).

DEPRECATED

Use nix flake update instead.

--debug

Set the logging verbosity level to 'debug'.
--log-format format

Set the format of log output; one of raw, internal-json, bar or bar-with-logs.
--print-build-logs / -L

Print full build logs on standard error.
--quiet

Decrease the logging verbosity level.
--verbose / -v

Increase the logging verbosity level.

Miscellaneous global options

--help

Show usage information.
--offline

Disable substituters and consider all previously downloaded files up-to-date.
--option name value

Set the Nix configuration setting name to value (overriding nix.conf).
--refresh

Consider all previously downloaded files out-of-date.
--repair

During evaluation, rewrite missing or corrupted files in the Nix store. During building, rebuild missing or corrupted store paths.
--version

Show version information.

Options that change the interpretation of installables

--expr expr

Interpret installables as attribute paths relative to the Nix expression expr.
--file / -f file

Interpret installables as attribute paths relative to the Nix expression stored in file. If file is the character -, then a Nix expression will be read from standard input. Implies --impure.

Note

See man nix.conf for overriding configuration settings with command line flags.

Nix Reference Manual