This section describes the notion of experimental features, and how it fits into the big picture of the development of Nix.

What are experimental features?

Experimental features are considered unstable, which means that they can be changed or removed at any time. Users must explicitly enable them by toggling the associated experimental feature flags. This allows accessing unstable functionality without unwittingly relying on it.

Experimental feature flags were first introduced in Nix 2.4. Before that, Nix did have experimental features, but they were not guarded by flags and were merely documented as unstable. This was a source of confusion and controversy.

When should a new feature be marked experimental?

A change in the Nix codebase should be guarded by an experimental feature flag if it is considered likely to be reverted or adapted in a backwards-incompatible manner after gathering more experience with it in practice.

Examples:

Changes to the Nix language, such as new built-ins, syntactic or semantic changes, etc.
Changes to the command-line interface

Lifecycle of an experimental feature

Experimental features have to be treated on a case-by-case basis. However, the standard workflow for an experimental feature is as follows:

A new feature is implemented in a pull request
- It is guarded by an experimental feature flag that is disabled by default
The pull request is merged, the experimental feature ends up in a release
- Using the feature requires explicitly enabling it, signifying awareness of the potential risks
- Being experimental, the feature can still be changed arbitrarily
The feature can be removed
- The associated experimental feature flag is also removed
The feature can be declared stable
- The associated experimental feature flag is removed
- There should be enough evidence of users having tried the feature, such as feedback, fixed bugs, demonstrations of how it is put to use
- Maintainers must feel confident that:
  - The feature is designed and implemented sensibly, that it is fit for purpose
  - Potential interactions are well-understood
  - Stabilising the feature will not incur an outsized maintenance burden in the future

The following diagram illustrates the process:

                  .------.
                  | idea |
                  '------'
                      |
       discussion, design, implementation
                      |
                      |     .-------.
                      |     |       |
                      v     v       |
               .--------------.  review
               | pull request |     |
               '--------------'     |
                   |     ^  |       |
                   |     |  '-------'
               .---'     '----.
               |              |
             merge       user feedback,
               |       (breaking) changes
               |              |
               '---.     .----'
                   |     |
                   v     |
               +--------------+
           .---| experimental |----.
           |   +--------------+    |
           |                       |
decision to stabilise      decision against
           |              keeping the feature
           |                       |
           v                       v
       +--------+             +---------+
       | stable |             | removed |
       +--------+             +---------+

Relation to the RFC process

Experimental features and RFCs both allow approaching substantial changes while minimizing the risk. However they serve different purposes:

An experimental feature enables developers to iterate on and deliver a new idea without committing to it or requiring a costly long-running fork. It is primarily an issue of implementation, targeting Nix developers and early testers.
The goal of an RFC is to make explicit all the implications of a change: Explain why it is wanted, which new use-cases it enables, which interface changes it requires, etc. It is primarily an issue of design and communication, targeting the broader community.

This means that experimental features and RFCs are orthogonal mechanisms, and can be used independently or together as needed.

Currently available experimental features

`auto-allocate-uids`

Allows Nix to automatically pick UIDs for builds, rather than creating nixbld* user accounts. See the auto-allocate-uids setting for details.

Refer to auto-allocate-uids tracking issue for feature tracking.

`ca-derivations`

Allow derivations to be content-addressed in order to prevent rebuilds when changes to the derivation do not result in changes to the derivation's output. See __contentAddressed for details.

Refer to ca-derivations tracking issue for feature tracking.

`cgroups`

Allows Nix to execute builds inside cgroups. See the use-cgroups setting for details.

Refer to cgroups tracking issue for feature tracking.

`configurable-impure-env`

Allow the use of the impure-env setting.

Refer to configurable-impure-env tracking issue for feature tracking.

`daemon-trust-override`

Allow forcing trusting or not trusting clients with nix-daemon. This is useful for testing, but possibly also useful for various experiments with nix-daemon --stdio networking.

Refer to daemon-trust-override tracking issue for feature tracking.

`dynamic-derivations`

Allow the use of a few things related to dynamic derivations:

"text hashing" derivation outputs, so we can build .drv files.
dependencies in derivations on the outputs of derivations that are themselves derivations outputs.

Refer to dynamic-derivations tracking issue for feature tracking.

`fetch-closure`

Enable the use of the fetchClosure built-in function in the Nix language.

Refer to fetch-closure tracking issue for feature tracking.

`fetch-tree`

Enable the use of the fetchTree built-in function in the Nix language.

fetchTree exposes a generic interface for fetching remote file system trees from different types of remote sources. The flakes feature flag always enables fetch-tree. This built-in was previously guarded by the flakes experimental feature because of that overlap.

Enabling just this feature serves as a "release candidate", allowing users to try it out in isolation.

Refer to fetch-tree tracking issue for feature tracking.

`flakes`

Enable flakes. See the manual entry for nix flake for details.

Refer to flakes tracking issue for feature tracking.

`git-hashing`

Allow creating (content-addressed) store objects which are hashed via Git's hashing algorithm. These store objects will not be understandable by older versions of Nix.

Refer to git-hashing tracking issue for feature tracking.

`impure-derivations`

Allow derivations to produce non-fixed outputs by setting the __impure derivation attribute to true. An impure derivation can have differing outputs each time it is built.

Example:

derivation {
  name = "impure";
  builder = /bin/sh;
  __impure = true; # mark this derivation as impure
  args = [ "-c" "read -n 10 random < /dev/random; echo $random > $out" ];
  system = builtins.currentSystem;
}

Each time this derivation is built, it can produce a different output (as the builder outputs random bytes to $out). Impure derivations also have access to the network, and only fixed-output or other impure derivations can rely on impure derivations. Finally, an impure derivation cannot also be content-addressed.

This is a more explicit alternative to using builtins.currentTime.

Refer to impure-derivations tracking issue for feature tracking.

`mounted-ssh-store`

Allow the use of the mounted SSH store.

Refer to mounted-ssh-store tracking issue for feature tracking.

`nix-command`

Enable the new nix subcommands. See the manual on nix for details.

Refer to nix-command tracking issue for feature tracking.

`no-url-literals`

Disallow unquoted URLs as part of the Nix language syntax. The Nix language allows for URL literals, like so:

$ nix repl
Welcome to Nix 2.15.0. Type :? for help.

nix-repl> http://foo
"http://foo"

But enabling this experimental feature will cause the Nix parser to throw an error when encountering a URL literal:

$ nix repl --extra-experimental-features 'no-url-literals'
Welcome to Nix 2.15.0. Type :? for help.

nix-repl> http://foo
error: URL literals are disabled

at «string»:1:1:

1| http://foo
 | ^

While this is currently an experimental feature, unquoted URLs are being deprecated and their usage is discouraged.

The reason is that, as opposed to path literals, URLs have no special properties that distinguish them from regular strings, URLs containing parameters have to be quoted anyway, and unquoted URLs may confuse external tooling.

Refer to no-url-literals tracking issue for feature tracking.

`parse-toml-timestamps`

Allow parsing of timestamps in builtins.fromTOML.

Refer to parse-toml-timestamps tracking issue for feature tracking.

`read-only-local-store`

Allow the use of the read-only parameter in local store URIs.

Refer to read-only-local-store tracking issue for feature tracking.

`recursive-nix`

Allow derivation builders to call Nix, and thus build derivations recursively.

Example:

with import <nixpkgs> {};

runCommand "foo"
  {
     buildInputs = [ nix jq ];
     NIX_PATH = "nixpkgs=${<nixpkgs>}";
  }
  ''
    hello=$(nix-build -E '(import <nixpkgs> {}).hello.overrideDerivation (args: { name = "recursive-hello"; })')

    mkdir -p $out/bin
    ln -s $hello/bin/hello $out/bin/hello
  ''

An important restriction on recursive builders is disallowing arbitrary substitutions. For example, running

nix-store -r /nix/store/kmwd1hq55akdb9sc7l3finr175dajlby-hello-2.10

in the above runCommand script would be disallowed, as this could lead to derivations with hidden dependencies or breaking reproducibility by relying on the current state of the Nix store. An exception would be if /nix/store/kmwd1hq55akdb9sc7l3finr175dajlby-hello-2.10 were already in the build inputs or built by a previous recursive Nix call.

Refer to recursive-nix tracking issue for feature tracking.

`repl-flake`

Enabled with flakes since 2.19

Allow passing installables to nix repl, making its interface consistent with the other experimental commands.

Refer to repl-flake tracking issue for feature tracking.

`verified-fetches`

Enables verification of git commit signatures through the fetchGit built-in.

Refer to verified-fetches tracking issue for feature tracking.

Nix Reference Manual