Name
nix-env --install
- add packages to user environment
Synopsis
nix-env
{--install
| -i
} args…
[{--prebuilt-only
| -b
}]
[{--attr
| -A
}]
[--from-expression
] [-E
]
[--from-profile
path]
[--preserve-installed
| -P
]
[--remove-all
| -r
]
Description
The install operation creates a new user environment. It is based on the current generation of the active profile, to which a set of store paths described by args is added.
The arguments args map to store paths in a number of possible ways:
-
By default, args is a set of derivation names denoting derivations in the default Nix expression. These are realised, and the resulting output paths are installed. Currently installed derivations with a name equal to the name of a derivation being added are removed unless the option
--preserve-installed
is specified.If there are multiple derivations matching a name in args that have the same name (e.g.,
gcc-3.3.6
andgcc-4.1.1
), then the derivation with the highest priority is used. A derivation can define a priority by declaring themeta.priority
attribute. This attribute should be a number, with a higher value denoting a lower priority. The default priority is5
.If there are multiple matching derivations with the same priority, then the derivation with the highest version will be installed.
You can force the installation of multiple derivations with the same name by being specific about the versions. For instance,
nix-env --install gcc-3.3.6 gcc-4.1.1
will install both version of GCC (and will probably cause a user environment conflict!). -
If
--attr
/-A
is specified, the arguments are attribute paths that select attributes from the default Nix expression. This is faster than using derivation names and unambiguous. Show the attribute paths of available packages withnix-env --query
:nix-env --query --available --attr-path`
-
If
--from-profile
path is given, args is a set of names denoting installed store paths in the profile path. This is an easy way to copy user environment elements from one profile to another. -
If
--from-expression
is given, args are Nix language functions that are called with the default Nix expression as their single argument. The derivations returned by those function calls are installed. This allows derivations to be specified in an unambiguous way, which is necessary if there are multiple derivations with the same name. -
If args are store derivations, then these are realised, and the resulting output paths are installed.
-
If args are store paths that are not store derivations, then these are realised and installed.
-
By default all outputs are installed for each derivation. This can be overridden by adding a
meta.outputsToInstall
attribute on the derivation listing a subset of the output names.Example:
The file
example.nix
defines a derivation with two outputsfoo
andbar
, each containing a file.# example.nix let pkgs = import <nixpkgs> {}; command = '' ${pkgs.coreutils}/bin/mkdir -p $foo $bar echo foo > $foo/foo-file echo bar > $bar/bar-file ''; in derivation { name = "example"; builder = "${pkgs.bash}/bin/bash"; args = [ "-c" command ]; outputs = [ "foo" "bar" ]; system = builtins.currentSystem; }
Installing from this Nix expression will make files from both outputs appear in the current profile.
$ nix-env --install --file example.nix installing 'example' $ ls ~/.nix-profile foo-file bar-file manifest.nix
Adding
meta.outputsToInstall
to that derivation will makenix-env
only install files from the specified outputs.# example-outputs.nix import ./example.nix // { meta.outputsToInstall = [ "bar" ]; }
$ nix-env --install --file example-outputs.nix installing 'example' $ ls ~/.nix-profile bar-file manifest.nix
Options
-
--prebuilt-only
/-b
Use only derivations for which a substitute is registered, i.e., there is a pre-built binary available that can be downloaded in lieu of building the derivation. Thus, no packages will be built from source.
-
--preserve-installed
/-P
Do not remove derivations with a name matching one of the derivations being installed. Usually, trying to have two versions of the same package installed in the same generation of a profile will lead to an error in building the generation, due to file name clashes between the two versions. However, this is not the case for all packages.
-
--remove-all
/-r
Remove all previously installed packages first. This is equivalent to running
nix-env --uninstall '.*'
first, except that everything happens in a single transaction.
Options
The following options are allowed for all nix-env
operations, but may not always have an effect.
-
--file
/-f
path
Specifies the Nix expression (designated below as the active Nix expression) used by the--install
,--upgrade
, and--query --available
operations to obtain derivations. The default is~/.nix-defexpr
.If the argument starts with
http://
orhttps://
, it is interpreted as the URL of a tarball that will be downloaded and unpacked to a temporary location. The tarball must include a single top-level directory containing at least a file nameddefault.nix
. -
--profile
/-p
path
Specifies the profile to be used by those operations that operate on a profile (designated below as the active profile). A profile is a sequence of user environments called generations, one of which is the current generation. -
--dry-run
For the--install
,--upgrade
,--uninstall
,--switch-generation
,--delete-generations
and--rollback
operations, this flag will causenix-env
to print what would be done if this flag had not been specified, without actually doing it.--dry-run
also prints out which paths will be substituted (i.e., downloaded) and which paths will be built from source (because no substitute is available). -
--system-filter
system
By default, operations such as--query --available
show derivations matching any platform. This option allows you to use derivations for the specified platform system.
Common Options
Most Nix commands accept the following command-line options:
-
Prints out a summary of the command syntax and exits.
-
Prints out the Nix version number on standard output and exits.
-
--verbose
/-v
Increases the level of verbosity of diagnostic messages printed on standard error. For each Nix operation, the information printed on standard output is well-defined; any diagnostic information is printed on standard error, never on standard output.
This option may be specified repeatedly. Currently, the following verbosity levels exist:
-
0
“Errors only”Only print messages explaining why the Nix invocation failed.
-
1
“Informational”Print useful messages about what Nix is doing. This is the default.
-
2
“Talkative”Print more informational messages.
-
3
“Chatty”Print even more informational messages.
-
4
“Debug”Print debug information.
-
5
“Vomit”Print vast amounts of debug information.
-
-
Decreases the level of verbosity of diagnostic messages printed on standard error. This is the inverse option to
-v
/--verbose
.This option may be specified repeatedly. See the previous verbosity levels list.
-
--log-format
formatThis option can be used to change the output of the log format, with format being one of:
-
raw
This is the raw format, as outputted by nix-build.
-
internal-json
Outputs the logs in a structured manner.
Warning
While the schema itself is relatively stable, the format of the error-messages (namely of the
msg
-field) can change between releases. -
bar
Only display a progress bar during the builds.
-
bar-with-logs
Display the raw logs, with the progress bar at the bottom.
-
-
--no-build-output
/-Q
By default, output written by builders to standard output and standard error is echoed to the Nix command's standard error. This option suppresses this behaviour. Note that the builder's standard output and error are always written to a log file in
prefix/nix/var/log/nix
. -
--max-jobs
/-j
numberSets the maximum number of build jobs that Nix will perform in parallel to the specified number. Specify
auto
to use the number of CPUs in the system. The default is specified by themax-jobs
configuration setting, which itself defaults to1
. A higher value is useful on SMP systems or to exploit I/O latency.Setting it to
0
disallows building on the local machine, which is useful when you want builds to happen only on remote builders. -
Sets the value of the
NIX_BUILD_CORES
environment variable in the invocation of builders. Builders can use this variable at their discretion to control the maximum amount of parallelism. For instance, in Nixpkgs, if the derivation attributeenableParallelBuilding
is set totrue
, the builder passes the-jN
flag to GNU Make. It defaults to the value of thecores
configuration setting, if set, or1
otherwise. The value0
means that the builder should use all available CPU cores in the system. -
Sets the maximum number of seconds that a builder can go without producing any data on standard output or standard error. The default is specified by the
max-silent-time
configuration setting.0
means no time-out. -
Sets the maximum number of seconds that a builder can run. The default is specified by the
timeout
configuration setting.0
means no timeout. -
--keep-going
/-k
Keep going in case of failed builds, to the greatest extent possible. That is, if building an input of some derivation fails, Nix will still build the other inputs, but not the derivation itself. Without this option, Nix stops if any build fails (except for builds of substitutes), possibly killing builds in progress (in case of parallel or distributed builds).
-
--keep-failed
/-K
Specifies that in case of a build failure, the temporary directory (usually in
/tmp
) in which the build takes place should not be deleted. The path of the build directory is printed as an informational message. -
Whenever Nix attempts to build a derivation for which substitutes are known for each output path, but realising the output paths through the substitutes fails, fall back on building the derivation.
The most common scenario in which this is useful is when we have registered substitutes in order to perform binary distribution from, say, a network repository. If the repository is down, the realisation of the derivation will fail. When this option is specified, Nix will build the derivation instead. Thus, installation from binaries falls back on installation from source. This option is not the default since it is generally not desirable for a transient failure in obtaining the substitutes to lead to a full build from source (with the related consumption of resources).
-
When this option is used, no attempt is made to open the Nix database. Most Nix operations do need database access, so those operations will fail.
-
--arg
name valueThis option is accepted by
nix-env
,nix-instantiate
,nix-shell
andnix-build
. When evaluating Nix expressions, the expression evaluator will automatically try to call functions that it encounters. It can automatically call functions for which every argument has a default value (e.g.,{ argName ? defaultValue }: ...
).With
--arg
, you can also call functions that have arguments without a default value (or override a default value). That is, if the evaluator encounters a function with an argument named name, it will call it with value value.For instance, the top-level
default.nix
in Nixpkgs is actually a function:{ # The system (e.g., `i686-linux') for which to build the packages. system ? builtins.currentSystem ... }: ...
So if you call this Nix expression (e.g., when you do
nix-env --install --attr pkgname
), the function will be called automatically using the valuebuiltins.currentSystem
for thesystem
argument. You can override this using--arg
, e.g.,nix-env --install --attr pkgname --arg system \"i686-freebsd\"
. (Note that since the argument is a Nix string literal, you have to escape the quotes.) -
--argstr
name valueThis option is like
--arg
, only the value is not a Nix expression but a string. So instead of--arg system \"i686-linux\"
(the outer quotes are to keep the shell happy) you can say--argstr system i686-linux
. -
--attr
/-A
attrPathSelect an attribute from the top-level Nix expression being evaluated. (
nix-env
,nix-instantiate
,nix-build
andnix-shell
only.) The attribute path attrPath is a sequence of attribute names separated by dots. For instance, given a top-level Nix expression e, the attribute pathxorg.xorgserver
would cause the expressione.xorg.xorgserver
to be used. Seenix-env --install
for some concrete examples.In addition to attribute names, you can also specify array indices. For instance, the attribute path
foo.3.bar
selects thebar
attribute of the fourth element of the array in thefoo
attribute of the top-level expression. -
--expr
/-E
Interpret the command line arguments as a list of Nix expressions to be parsed and evaluated, rather than as a list of file names of Nix expressions. (
nix-instantiate
,nix-build
andnix-shell
only.)For
nix-shell
, this option is commonly used to give you a shell in which you can build the packages returned by the expression. If you want to get a shell which contain the built packages ready for use, give your expression to thenix-shell --packages
convenience flag instead. -
-I
pathAdd an entry to the Nix expression search path. This option may be given multiple times. Paths added through
-I
take precedence overNIX_PATH
. -
--option
name valueSet the Nix configuration option name to value. This overrides settings in the Nix configuration file (see nix.conf5).
-
Fix corrupted or missing store paths by redownloading or rebuilding them. Note that this is slow because it requires computing a cryptographic hash of the contents of every path in the closure of the build. Also note the warning under
nix-store --repair-path
.
Note
See
man nix.conf
for overriding configuration settings with command line flags.
Environment variables
NIX_PROFILE
Location of the Nix profile. Defaults to the target of the symlink~/.nix-profile
, if it exists, or/nix/var/nix/profiles/default
otherwise.
Common Environment Variables
Most Nix commands interpret the following environment variables:
-
Indicator that tells if the current environment was set up by
nix-shell
. It can have the valuespure
orimpure
. -
A colon-separated list of directories used to look up the location of Nix expressions using paths enclosed in angle brackets (i.e.,
<path>
), e.g./home/eelco/Dev:/etc/nixos
. It can be extended using the-I
option.If
NIX_PATH
is not set at all, Nix will fall back to the following list in impure and unrestricted evaluation mode:$HOME/.nix-defexpr/channels
nixpkgs=/nix/var/nix/profiles/per-user/root/channels/nixpkgs
/nix/var/nix/profiles/per-user/root/channels
If
NIX_PATH
is set to an empty string, resolving search paths will always fail. For example, attempting to use<nixpkgs>
will produce:error: file 'nixpkgs' was not found in the Nix search path
-
Normally, the Nix store directory (typically
/nix/store
) is not allowed to contain any symlink components. This is to prevent “impure” builds. Builders sometimes “canonicalise” paths by resolving all symlink components. Thus, builds on different machines (with/nix/store
resolving to different locations) could yield different results. This is generally not a problem, except when builds are deployed to machines where/nix/store
resolves differently. If you are sure that you’re not going to do that, you can setNIX_IGNORE_SYMLINK_STORE
to1
.Note that if you’re symlinking the Nix store so that you can put it on another file system than the root file system, on Linux you’re better off using
bind
mount points, e.g.,$ mkdir /nix $ mount -o bind /mnt/otherdisk/nix /nix
Consult the mount 8 manual page for details.
-
Overrides the location of the Nix store (default
prefix/store
). -
Overrides the location of the Nix static data directory (default
prefix/share
). -
Overrides the location of the Nix log directory (default
prefix/var/log/nix
). -
Overrides the location of the Nix state directory (default
prefix/var/nix
). -
Overrides the location of the system Nix configuration directory (default
prefix/etc/nix
). -
Applies settings from Nix configuration from the environment. The content is treated as if it was read from a Nix configuration file. Settings are separated by the newline character.
-
Overrides the location of the Nix user configuration files to load from.
The default are the locations according to the XDG Base Directory Specification. See the XDG Base Directories sub-section for details.
The variable is treated as a list separated by the
:
token. -
Use the specified directory to store temporary files. In particular, this includes temporary build directories; these can take up substantial amounts of disk space. The default is
/tmp
. -
This variable should be set to
daemon
if you want to use the Nix daemon to execute Nix operations. This is necessary in multi-user Nix installations. If the Nix daemon's Unix socket is at some non-standard path, this variable should be set tounix://path/to/socket
. Otherwise, it should be left unset. -
If set to
1
, Nix will print some evaluation statistics, such as the number of values allocated. -
If set to
1
, Nix will print how often functions were called during Nix expression evaluation. This is useful for profiling your Nix expressions. -
If Nix has been configured to use the Boehm garbage collector, this variable sets the initial size of the heap in bytes. It defaults to 384 MiB. Setting it to a low value reduces memory consumption, but will increase runtime due to the overhead of garbage collection.
XDG Base Directories
Nix follows the XDG Base Directory Specification.
For backwards compatibility, Nix commands will follow the standard only when use-xdg-base-directories
is enabled.
New Nix commands (experimental) conform to the standard by default.
The following environment variables are used to determine locations of various state and configuration files:
XDG_CONFIG_HOME
(default~/.config
)XDG_STATE_HOME
(default~/.local/state
)XDG_CACHE_HOME
(default~/.cache
)
Examples
To install a package using a specific attribute path from the active Nix expression:
$ nix-env --install --attr gcc40mips
installing `gcc-4.0.2'
$ nix-env --install --attr xorg.xorgserver
installing `xorg-server-1.2.0'
To install a specific version of gcc
using the derivation name:
$ nix-env --install gcc-3.3.2
installing `gcc-3.3.2'
uninstalling `gcc-3.1'
Using attribute path for selecting a package is preferred, as it is much faster and there will not be multiple matches.
Note the previously installed version is removed, since
--preserve-installed
was not specified.
To install an arbitrary version:
$ nix-env --install gcc
installing `gcc-3.3.2'
To install all derivations in the Nix expression foo.nix
:
$ nix-env --file ~/foo.nix --install '.*'
To copy the store path with symbolic name gcc
from another profile:
$ nix-env --install --from-profile /nix/var/nix/profiles/foo gcc
To install a specific [store derivation] (typically created by
nix-instantiate
):
$ nix-env --install /nix/store/fibjb1bfbpm5mrsxc4mh2d8n37sxh91i-gcc-3.4.3.drv
To install a specific output path:
$ nix-env --install /nix/store/y3cgx0xj1p4iv9x0pnnmdhr8iyg741vk-gcc-3.4.3
To install from a Nix expression specified on the command-line:
$ nix-env --file ./foo.nix --install --expr \
'f: (f {system = "i686-linux";}).subversionWithJava'
I.e., this evaluates to (f: (f {system = "i686-linux";}).subversionWithJava) (import ./foo.nix)
, thus selecting
the subversionWithJava
attribute from the set returned by calling the
function defined in ./foo.nix
.
A dry-run tells you which paths will be downloaded or built from source:
$ nix-env --file '<nixpkgs>' --install --attr hello --dry-run
(dry run; not doing anything)
installing ‘hello-2.10’
this path will be fetched (0.04 MiB download, 0.19 MiB unpacked):
/nix/store/wkhdf9jinag5750mqlax6z2zbwhqb76n-hello-2.10
...
To install Firefox from the latest revision in the Nixpkgs/NixOS 14.12 channel:
$ nix-env --file https://github.com/NixOS/nixpkgs/archive/nixos-14.12.tar.gz --install --attr firefox